Call us: 1-412-779-8043
MAINTENANCE
BENEFITS OF PREVENTATIVE MAINTENANCE PROGRAM
-
Increase operational efficiency, safety and reliability
-
Extend useful life of your equipment
-
Reduce probability of equipment malfunctioning
-
Decrease costly downtime
-
Decrease long-term repair expense
-
Establish relationship with experienced, service-oriented professionals
Sectional Doors
Full fifteen point safety inspection of your door and a twelve point safety inspection of your operator including:
Sectional Doors
Test door operation.
Inspect sections.
Inspect door alignment and level.
Inspect, lubricate and adjust springs if necessary.
Inspect tubing / shaft.
Inspect and tighten drums and couplings.
Inspect cables.
Inspect and lubricate rollers
Inspect and lubricate hinges.
Inspect and lubricate bottom brackets and top fixtures.
Inspect track, mounting brackets.
Inspect lock.
Inspect bottom section and top weather seal.
Inspect perimeter weather seal.
Inspect windows.
Inspect chain hoist.
Motor Operator
Test operation of motor operator.
Check limit settings.
Inspect and tighten electrical connections.
Inspect drive chain.
Check operator brake settings.
Inspect sprockets and shafts for wear and balance.
Inspect and lubricate roller chain and bearings.
Inspect belts.
Inspect and Adjust clutch.
Inspect push button.
Inspect / test safety edge.
Inspect / test photo eyes.
Rolling Steel Doors
Full ten point safety inspection of your rolling door and an eight point safety inspection of your operator including:
Rolling Steel Doors
Inspect door alignment and level.
Inspect slats and endlocks for damage.
Inspect guides, bottom bar and hood for damage.
Inspect all weather-stripping for wear or damage.
Adjust spring and lubricate bearings.
Inspect and tighten fasteners.
Inspect and lubricate chain hoist.
Inspect locks for proper operation.
Inspect and tighten all sprockets and shaft collars.
Inspect safety labels, placement and condition.
Motor Operator
Test operation of motor operator.
Check limit settings.
Inspect and tighten electrical connections.
Inspect drive chain.
Check operator brake settings.
Inspect sprockets and shafts for wear and balance.
Inspect and lubricate roller chain and bearings.
Inspect belts.
Inspect and Adjust clutch.
Inspect push button.
Inspect / test safety edge.
Inspect / test photo eyes.
Dock Leveler
Full twenty-seven point safety inspection of your dock levelers including:
Dock Levelers
Check Operation of Leveler
Clean Debris Off Top of Lip Spools
Clean & Sweep Out Pit
Inspect Leveler Welds
Inspect leveler subframe
Inspect Shims
Inspect Rear Hinges
Lubricate Rear Hinge Pins
Inspect motor, wire and airbag
Check Lip Assist Rod & Spring Adjustment
Inspect and lube aigbag pan and roller
Lubricate All Pins & Pivot Points
Lubricate Lip Hinge & Spools
Check for Lip Crown
Inspect Snubbing Cable
Inspect Chains & "S" Hooks
Lubricate Lifter Arm (Roller, Bearings)
Inspect Lip Extension (Hydracheck, Walk Out Lip)
Inspect Cam
Check for Proper Operation
Leveler Extension
Lip Extension/Retraction
Lip Fall Speed
Inspect Weatherseal
Inspect Toe Guards
Inspect Dock Bumpers
Inspect Seal/Shelter
Final Clean-Up of Dock Leveler Area